Coated 12 Volt Rechargeable Battery Packs

No need to be attached to your sled anymore! Whether you’re racing, shredding the backcountry or cruising the trails.

IMPORTANT BEFORE USE: You must charge the battery with a fast charger or higher capacity wall charger before use. The first charge will take a couple of hours or so to get started. The LED lights will show up after, indicating that it is charging.

Must be stored with a full charge in the off-season to keep the battery fresh. Or must be used/charged often.

12 Volt standard capacity Li-ion battery pack for use with our Blizzard Buster helmet safety light. Includes a power switch and battery level indicator with a type-C charging port. Has a short female RCA lead to connect to your heated shield cord.

Use the short part of the helmet’s power accessory cord to connect to the battery. Store inside your jacket pocket to keep the battery warm and out of the way while riding.

Water proof up to Ip6 standards. Durable rubber coating for protection. Slim and compact to fit in most snowmobile jacket pockets. Choose the 9,000mAh battery pack for the heated shield.

Small (5,000 mAh) battery runs your Blizzard Buster Helmet Light for up to 2 days if kept warm. Dimensions: 3 3/4” X 2 3/4” X 1 1/4”, 11oz, cord length: 6.5”

Large (9,000 mAh) battery runs your heated shield and the Blizzard Buster for up to 6 hours depending on the size of your heated shield. Dimensions: 6.5” X 2 3/4” X 1 1/4”, 1lb 3.8oz, cord length: 6.5”

• Ride untethered: Easier power cable management
• Reliable visibility: consistent power for helmet safety lights and heated shields/goggles
• Winter-ready: rugged rubber enclosure with IP6 waterproofing
• Know your charge: power switch + battery level indicator
• Quick turnaround: USB-C charging (charger not included)

• High-capacity 12V lithium-ion cells
  
• Rugged rubber enclosure (meets IP6 waterproofing standards)
  
• USB-C charge port, power switch, LED level indicator
  
• 5″ female RCA lead (connects directly to your helmet power cord)

1. Charge via USB-C until full (use a quality wall charger; charger not included).
   
2. Carry in a jacket pocket or mount to a Tek-Vest with the included case.
   
3. Connect the RCA lead to your helmet power cord; press the power switch.
   
4. Check the battery indicator before each ride; keep the pack warm for best runtime.

Do not submerge in water or throw in a fire. Improper use and negligence will void warranty and may cause serious harm. Biteharder assumes no liability for personal injury, loss/theft, product damage or misuse.

6 month limited warranty from purchase. This warranty covers factory defects only. Does not include improper use and abuse, fading materials, normal wear, accidents, negligence, or malfunctions due to modifications. Do not store in a cold environment. The defective battery must be returned to Biteharder for inspection before a replacement battery pack is sent back. We will cover the shipping of the replacement battery pack.

• 5,000 mAh: designed to power your helmet safety light up to 24 hours*
  • Size: 3.75” H x 2.75” W x 1.00” D | Weight: < 12 oz
• 9,000 mAh: designed to power heated visor/goggles and a helmet safety light for up to 8 hours*
  • Size: 6.50” H x 2.75” W x 1.00” D Weight: < 21 oz

* Runtime varies by temperature, power draw, and charge level. Keeping the pack inside your coat will maintain higher battery temperatures for better performance.

• Select proper size depending on power needed.
• Do not submerge lithium-ion batteries; store dry and partially charged when not in use.
• Use only as directed; improper use may cause injury.
• BITEHARDER Products assumes no liability for misuse.